General Description
The Compliance-Pro™ HSV Inspect is an on-line full ISO 15416/ANSI X.3 bar code verifier (linear symbologies). This tool provides a solution that is close to the price of a handheld verifier but still offers full 100% on-line bar code verification. The system is extremely easy to use with a single button (for calibration) and a three bulb light stack (red/yellow/green). This product inspects the bar code but does not offer bar code analysis to determine the cause of the ISO/ANSI results.

Equipment Type

• On-line full ISO/ANSI bar code verifier

• All ISO and ANSI parameters

• GTIN 12 A & E, GTIN 8, GTIN 13 including 2 and 5 digit supplemental codes
• Generic (ANSI Traditional) Interleaved 2 of 5 plus GTIN 14 (I 2/5) Shipping Container Symbol
• Generic (ANSI Traditional) Code 39 plus mod 43 check character; AIAG, LOGMARS, and HIBC formats
• Generic (ANSI Traditional) Code 128; GTIN 14 (GS1 128) Shipping Container Symbol
• Codabar Variant
• Code 93

• Auto-discrimination between symbologies
• 600 scan per second scan head
• Two operation modes: Free scan and Sync pulse
• RS-232 programming port

• Global Threshold (ISO/ANSI method parameter)
• Reference Decode (ISO/ANSI method parameter)
• Decodability (ISO/ANSI method parameter)
• Modulation (ISO/ANSI method parameter)
• Defects (ISO/ANSI method parameter)
• Edge Contrast (ISO/ANSI method parameter)
• Rmin/Rmax (ISO/ANSI method parameter)
• Symbol Contrast (ISO/ANSI method parameter)
• Overall Symbol Grade (ISO/ANSI method parameter)
• Modulo Check Digits (mandatory symbology and optional application parameters)
• PCS (Traditional method parameter)
• Reflectance - Light (Traditional method parameter)
• Reflectance - Dark (Traditional method parameter)
• Ratio (Traditional method parameter)
• Average Bar Deviation (Traditional method parameter)
• Minimum Bar Deviation (Traditional method parameter)
• Maximum Bar Deviation (Traditional method parameter)
• Quiet Zone (Traditional method parameter)
• X Dimension (Traditional method parameter)
• Bar Code Direction (scanner decoder function)
• Symbology Type (scanner decoder function)
• % Decode (multiple scanning parameter)
• Encoded Data (scanner decoder function)

• Single 1 button: Calibrate
• 5 LED indicators: Power/Sync, Calibration, Bar code read, and Two programmable
• Bi-color LED (red/green) for each scan head
• Three bulb light stack
• Five outputs (open drain FET type): A/B (>2.5) grade, C (1.5 - 2.5) grade, D/F (<1.5), and two customizable

• Four available models; 3, 6, 10, or 20 mil scan head
• 660 nm (red light source)

• None

• Calibration card and protective sleeve provided with each unit

• UL approved AC power supply

• Depot service performed

• Traverse: 42"
• Verification Scanner: 5.0" (127 mm) L x 4.4" (111 mm) W x 2.4" (60 mm) H

• ISO15416-1 Bar Code Print Quality Test Specification
• ISO15426-1 Bar Code Verifier Conformance Specification
• ANSI X3.182-1990 Bar Code Print Quality Guideline